Replacement Nissan Key Fob
Utilizing sophisticated encryption and radio frequency, Nissan smart keys provide additional security against theft. However, these systems are powered by an internal battery which will eventually degrade and may require replacement.
Replacing the battery of a key fob is a simple task. Luckily, the certified technicians and parts specialists at Boch Nissan are here to assist!
Battery
The key fob is an crucial part of your Nissan key fob. It allows you to unlock the doors, start your engine, and use other key functions. When it stops working and you are unable to use it, you must know the cause. You can fix the issue by simply replacing the battery.
You can buy a new CR2032 button cell battery from the hardware store or in a multipack at a discount supermarket chain for a tiny amount. You'll also require a tiny screwdriver that you can use to open the back panel of your key fob. Most models come with a small tab or notch you can use your screwdriver to split the fob into two parts. Once The KeyLab opened the fob, you can remove the old battery and insert the new one, making sure it's oriented correctly.
Depending on the model of your Nissan, you may need to ensure that the new battery is the right one for your model. This information is usually located in the owner's manual or on the back of the fob for the key. Replace the battery in the fob and snap the cover shut. Check it out to make sure it functions. If you run into any problems, check out the videos on YouTube to find the solution. If you still need help, contact the service center at your Nissan dealer near Farmington Hills.
Programming
Modern Nissan automobiles come with the key fob, which offers lots of added convenience and functionality when compared with the manual keys of old. Unfortunately, they are also more susceptible to battery problems and will need to be replaced as time goes by. Fortunately, this is an easy fix that is done at home.
The first step in the process is to take out the battery that was used up. To do this, find an opening at the back of your keyfob, and pull it downwards. This will release the mechanical key used to operate the emergency starters. It is recommended to keep it in your wallet and return it when the replacement has been completed.
After taking the old battery, note the location and the way it was placed. You will need to use an screwdriver with a flat head to lift the battery off. Replace the old battery with the new one. Make sure the plus side is facing down. Reassemble the outer casing and test it to make sure that it's working properly.
You should now be able to start your car by pressing any button on the fob. You can also test the connection by pressing any button in the dashboard of your car. If you have any questions or need help with your Nissan vehicle, call the service center at Boch Nissan South.
Locks
The Nissan Intelligent Key is designed to lock and unlock your vehicle and open the trunk with one click. It may be that there is another issue that is causing the problem if it still does not work after replacing the battery and programming. In certain situations a fob that's damaged might require replacement parts or repairs to the circuit board to function once more. Water, blunt force, or scratches on the board may cause damage to the board.
A professional can check the Intelligent Key and determine if it needs to be repaired or replaced. In some instances it is possible to get the issue resolved with a simple, inexpensive fix. If the issue is more severe the key may need to replace the key.
The process of replacing the battery inside your Nissan's key fob takes just a few minutes. However, this process involves touching delicate and sensitive electronic components, so it is recommended to always wear gloves (preferably latex) or alternatively, non-latex. You will also need an flathead screwdriver as well as a new CR2032 3V battery.
Begin by stepping into your vehicle, and making sure the doors are locked. Press the unlock button on the keyfob six to ten times. Remove the key from the ignition. Do not turn the key to start the vehicle. The hazard light should blink twice. This means that your Nissan is now in program mode.
Keyless Entry
We have some good news for you if you think that your key fob is doing nothing more than unlock and lock your car. Certain modern fobs can actually roll down the windows in your car, or start it when you touch your key towards the rear bumper.
Contrary to the traditional key which has just two or three locks, these newer systems are built on RFID technology. The key fob is equipped with a chip that has a specific frequency. This enables it to communicate with the receiver of your car and unlock the trunk or doors. Most models can even detect you when you enter using the fob, which means it will know to automatically unlock and start your car.
Certain models let you open the trunk using your keys behind the car. This can be extremely useful if your hands are full of luggage or groceries. The key fob features a button that allows you to start your vehicle by pressing it onto the steering wheel. This system can be activated by tapping the clutch or brake button when you press the START/STOP buttons.
The fob on your key could be dead if you are struggling to get in your Nissan to complete errands around Troy or go out on an evening. Flip the fob upside down and then press the small latch that is located at the back. If you can see the light flashing for unlock and lock you've successfully programmed your replacement nissan key fob.